Calibration can be made of equipment what is used for measuring e.g. temperature, weights or what is used for chemical analyzes.
Calibration is done by a certified calibration service. As a proof of the calibration and how long the calibration is valid, the calibration services will put calibration stickers with the date of the equipment calibration and the date of expire.
Calibration is especially necessary where you have to measure things very accurate like in the chemical industry or in a laboratory. Here it is very often necessary to make an equipment celebration of the weighing machine. This is done with standard calibration weights. In the laboratory they are using electronic weighing machines. The equipment calibration of this weighing machine should be done more often. It is (in some cases) also possible to calibrate these devices without calibration services. (Attention: You will get no calibration stickers.) Therefore you need calibration weights in your laboratory. The equipment calibration steps are the following:
1. You have to clean the weighing machine.
2. You have to start the calibration software of the weighing machine.
3. The program will ask you for the different standard calibration weights (more than three).
4. The calibration software will calculate a calibration curve.
5. The equipment calibration is finalized.
This are the normal steps and in general the steps of every equipment calibration. You compare the equipment calibration with a standard e.g. calibration weights.
This is also done by calibration services but they will certify you the equipment calibration for a certain time with the calibration stickers. That means also that in cases of mistakes you can make the calibration services responsible for this e.g. cost for repeat the measurement.
Since it is more and more necessary to measure very accurate, it is necessary that your company can proof this. The calibration stickers together with the quality management of your company are a good advertisement for potential clients.
Tradenet Services srl 02860350244 Via Marconi, 3 36015 Schio (VI) Italy
+39-0445-575870 +39-0445-575399