Troubleshooting Cutler Hammer Breakers

2007-03-08 10:33:40

( Technology )



Cutler hammer breakers sometimes display some flaws that could have disastrous effects or consequences. Thus, it is extremely important to check your Cutler hammer breakers first before using it. But, really, you don’t have to worry too much because breakers don’t really malfunction all that often.

The most common complaints of cutler hammer breakers users is that they find it difficult to test if the circuit hammer circuit breaker itself is the one malfunctioning when resetting the cutler hammer breakers has no effect.

Of course, the best solution for this problem involving cutler hammer breakers would be to call an electrician, as electricians are the foremost experts on things involving electricity. Besides, if you make a mistake, even a small one, it could cost your life. You might get electrocuted. But then again, it wouldn’t hurt to have a bit of back-up knowledge on cutler hammer breakers. The first step is to know which are the cutler hammer generator and the cutler hammer panel. You should also know the location of the cutler hammer switches. In short, you should know the name and location of the parts.

The next thing you should do is purchase a voltohm meter. Attach this little tool to the breaker and set it to 200 volts. The little dial should move. If it reads 0 – 130 volts, then this would indicate that your cutler hammer circuit breaker is still in good shape. If not then you might have a weak breaker. Another way is to remove the wires from the breaker and then turn it on. After that, you should check the terminal lugs on the breaker for voltage

It’s really as simple as that. But of course, you should still opt for hiring an electrician instead of doing things yourself. This is because these people have substantial experience and knowledge in the field of electrical systems.


All rights Reserved © Tradenet Services srl
Do not duplicate or redistribute in any form.